Product Overview

Toughened (tempered) glass starts as annealed float glass of the required thickness. After all cutting, edge work, holes and cut-outs are complete, the glass is heated close to its softening point and then cooled rapidly with air. The outer surfaces cool and contract first, leaving them in compression while the core remains in tension.

This stress balance gives toughened glass a substantially higher resistance to bending and thermal stress than annealed glass of the same thickness. When it does break, the stored energy fractures the whole pane into small, relatively blunt fragments rather than long, sharp pieces.

Toughened glass looks the same as the base glass it is made from. It can be produced from clear, tinted or frosted substrates, and it is used as a component in laminated glass and double glazed units where those constructions call for heat-treated glass.

How Toughened Glass Is Processed

General process

  • Cutting the base glass to final size and shape
  • Edge grinding or polishing
  • Drilling holes and forming notches or cut-outs
  • Washing
  • Heating, followed by rapid air quenching

What RARA does

RARA cuts, edge-processes, drills and toughens glass to the dimensions and details supplied for each order.

Toughened glass cannot be cut, drilled or edge-worked after toughening. All dimensions, hole positions and cut-outs must therefore be final before production begins.

Characteristics

  • Strength — Higher resistance to bending loads and impact than annealed glass of the same thickness.
  • Thermal stress — Better tolerance of temperature differences across the pane.
  • Breakage behaviour — Breaks into small fragments. A monolithic toughened pane does not stay in place once broken; where retention matters, laminated toughened glass is normally considered.
  • Appearance — Same clarity and colour as the base glass. Heat treatment can introduce slight surface distortion that is visible in reflections.
  • No post-processing — Cannot be cut, drilled or edge-worked after toughening.
  • Spontaneous breakage — In rare cases toughened glass can break without apparent cause because of microscopic inclusions in the base glass. This is relevant for overhead and high-risk locations.

Applications

  • Frameless glass doors and entrances — Withstand repeated handling and impact; hardware is fixed through drilled holes made before toughening.
  • Office and commercial partitions — Safer breakage behaviour in occupied spaces.
  • Shower enclosures — Exposure to knocks and temperature changes in wet areas.
  • Glass railings and balustrades — Usually specified as laminated toughened glass so the panel stays in place if a ply breaks. Barrier design should be confirmed by the project engineer.
  • Facades and windows — Where wind load, size or thermal stress requires heat-treated glass.

Specification Considerations

Information to have ready when requesting a quotation:

  • Final dimensions (width × height) and any shaped corners or radii
  • Glass thickness, selected for the size, fixing method and application
  • Hole sizes and positions, notches and cut-outs, matched to the hardware to be used
  • Edge finish for exposed edges
  • Base glass: clear, tinted or frosted
  • Quantity and required delivery schedule
  • Whether the panel will be laminated or used in a double glazed unit

Thickness for structural, barrier or overhead applications should be confirmed with the project engineer. Discuss any requirement that needs technical confirmation with RARA before final specification.

RARA Processing and Supply

Processes relevant to toughened glass from RARA’s processing capability:

  • Toughening (tempering)
  • CNC glass cutting and CNC glass processing
  • Edge polishing and beveling
  • Drilling
  • Cut-outs and notches
  • Shape cutting
  • Installation of glass doors, office partitions, shower enclosures and railings

Related Products

Product images on this page are computer-generated illustrations for reference. They are not photographs of RARA projects, facilities or installations.

Discuss Your Toughened Glass Requirement

Share your project dimensions, quantity and application requirements with our team. RARA can review the specification and discuss the appropriate glass solution.